MA252
MA252
MA252
MA252
MA252
MA252
MA252
MA252
MA252
MA252
MA252
MA252
MA252
MA252

MA252

MCI-252
5 800,00 €
AR PVN

2-Channel Integrated Amplifier
Hybrid: tube preamp; solid state amp
​100 Watts into 8 Ohm; 160 Watts into 4 Ohm

 

ELECTRONIC SPECIFICATIONS
POWER OUTPUT PER CHANNEL
100 Watts into 8 Ohms
160 Watts into 4 Ohms
NUMBER OF CHANNELS
2
SPEAKER IMPEDANCE
4 or 8 Ohms
RATED POWER BAND
20Hz to 20kHz
TOTAL HARMONIC DISTORTION
0.03%
DYNAMIC HEADROOM
1.8dB
FREQUENCY RESPONSE +0,-0.5DB
20Hz to 20kHz
FREQUENCY RESPONSE, +0, -3DB
10Hz to 100kHz
SENSITIVITY PHONO (MOVING COIL)
N/A
SENSITIVITY PHONO (MOVING MAGNET)
3.0mV
SENSITIVITY HIGH LEVEL (BALANCED / UNBALANCED)
0.6V/0.3V
SENSITIVITY (POWER AMP INPUT)
N/A
SIGNAL TO NOISE RATIO (MOVING COIL)
N/A
SIGNAL TO NOISE RATIO (MOVING MAGNET)
80dB
SIGNAL TO NOISE RATIO (HIGH LEVEL)
97dB
SIGNAL TO NOISE RATIO (POWER AMP INPUT)
N/A
INPUT IMPEDANCE (BALANCED / UNBALANCED)
20K/20K
DAMPING FACTOR
8 Ohms: >200
4 Ohms: >100
MAXIMUM OUTPUT (BALANCED / UNBALANCED)
8V Unbalanced
CONNECTIVITY
BALANCED INPUT
1
UNBALANCED INPUT
2
PHONO INPUT MOVING COIL
0
PHONO INPUT MOVING MAGNET
1 (fixed loading)
UPGRADEABLE DIGITAL AUDIO MODULE
No
DIGITAL COAXIAL INPUT
0
DIGITAL OPTICAL INPUT
0
DIGITAL MCT (DIN) INPUT
0
DIGITAL USB INPUT
0
BALANCED VARIABLE OUTPUT
0
UNBALANCED FIXED OUTPUT
0
UNBALANCED VARIABLE OUTPUT
0
HEADPHONE OUTPUT
1/4" High Drive
SUBWOOFER OUTPUT
1 (mono)
AM/FM TUNER OPTION
No
HOME THEATER PASSTHRU
No
UNBALANCED ANALOG CONNECTOR TYPE
Standard
SPEAKER BINDING POST TYPE
Standard
SERVICE PORT
0
DIGITAL AUDIO SPECIFICATIONS
DIGITAL-TO-ANALOG CONVERTER (DAC) TYPE
N/A
DIGITAL COAXIAL INPUT SAMPLE RATE
N/A
DIGITAL OPTICAL INPUT SAMPLE RATE
N/A
DIGITAL MCT (DIN) INPUT SAMPLE RATE
N/A
DIGITAL USB INPUT SAMPLE RATE
N/A
CONTROL
TONE CONTROLS
Bass and Treble
TONE BYPASS AND INPUT ASSIGN
Yes
RS232 CONTROL INPUT
No
POWER CONTROL OUTPUT
1
REAR PANEL DATA PORT
1
REAR PANEL IR SENSOR INPUT
No
INPUT LEVEL MATCH
Yes
GENERAL SPECIFICATIONS
VACUUM TUBE OR SOLID STATE
Preamplifier: Vacuum Tube
Power Amplifier: Solid State
OUTPUT AUTOFORMER
No
OUTPUT METERS
No
DUAL LAYER CHASSIS
Yes
CHASSIS FINISH
Polished stainless steel
MCINTOSH MONOGRAMMED HEATSINKS™
Yes
POWER REQUIREMENT
120V 50/60Hz, 3.7A
STANDBY POWER REQUIREMENT
<0.5 Watts
WEIGHTS & DIMENSIONS
DIMENSIONS (W X H X D)
12" (30.5cm) x 7-5/8" (19.4cm) x 18" (45.7cm)
WEIGHT
28 lbs (12.7 kg)
SHIPPING WEIGHT
37 lbs (16.8 kg)

No reviews

16 produktu tajā pat kategorijā:

Produkts pievienots vēlmju sarakstam
Produkts pievienots salīdzināšanai.

Mūsu interneta vietnē tiek izmantoti sīkfaili. Sīkfaili palīdz nodrošināt pienācīgu vietnes darbību un tās pilnveidošanu, tāpēc obligātie sīkfaili (tehniskie, funkcionālie un analītiskie) tiek instalēti automātiski. Lai individualizētu jūsu sērfošanas pieredzi un sniegtu piedāvājumus, kuri būtu aktuāli tieši jums, tīmekļa vietnē tiek izmantoti arī mērķa sīkfaili. Nospiežot “piekrītu”, jūs piekrītat mērķa sīkfailu instalēšanai un izmantošanai. Savu piekrišanu varēsiet atsaukt jebkurā laikā, nomainot sava interneta pārlūka iestatījumus un izdzēšot ierakstītos sīkfailus. Vairāk informācijas – sīkfailu politikā